3D print Olympia Centre
A free, printable 3D model of the Olympia Centre skyscraper in Chicago, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Olympia Centre in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 221 m
- On a 160 mm print
- 59 mm
- Scale
- 1:3,750
221 m of Olympia Centre, 59 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower, printed slowly
A tall skyscraper is slender for its height. Printing it slowly, with good cooling, keeps the upper floors clean, and a layer height of 0.12–0.16 mm keeps vertical detail crisp.
- One piece with the ground
Olympia Centre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Olympia Centre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Olympia Centre
Chicago's Olympia Centre is a skyscraper designed by Skidmore, Owings & Merrill. At 725 ft (221 m) and 63 floors, no other mid-block building in Chicago is taller. Construction started in 1981 and finished in 1986. Its name ties back to Olympia and York of Toronto, the original developer.
It is a mixed-use building: offices fill the lower part, and residences occupy the narrower upper section. It has three zones: a retail zone, commercial office space on floors 6 to 23, and private condominium homes on floors 24 to 63. The exterior is Swedish granite that was finished in Italy.
About this model
Olympia Centre is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
