3D print One United Nations Plaza
A free, printable model of One United Nations Plaza, a tall tower with sloping upper walls, and the crowded Midtown blocks, roads and green strips around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 154 m
- On a 160 mm print
- 42 mm
- Scale
- 1:3,750
154 m of One United Nations Plaza, 42 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Sloping walls and setbacks
The walls tilt inward higher up, and the top has a notched, stepped outline. Print friendly adapts these small angled parts to the print scale; Full detail keeps them on larger prints.
- Fine glass grid
The facade is a very fine grid. A larger print size and a layer height of 0.12–0.16 mm keep the grid lines crisp, and slow printing helps the tall shaft.
- One piece with the ground
One United Nations Plaza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. One United Nations Plaza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About One United Nations Plaza
A Kevin Roche and John Dinkeloo design for the UN, One United Nations Plaza is a Turtle Bay, Manhattan building that mixes uses. It faces the UN headquarters across First Avenue, on 44th Street's north side. Its 39 stories combine offices with a hotel, and it was the earliest New York City building to serve both purposes. Turner Construction Company built it, and it had its formal opening on November 20, 1975.
Offices occupy the first 26 floors, which are the largest, with the hotel above them on the smallest floors, so the walls tilt inward higher up. Zoning rules shaped the design, which includes several setbacks and a notch cut into the southeast corner to echo the heights of buildings across the street. Unlike the oblong UN Secretariat, the building is L-shaped, with a hexagonal footprint.
The whole exterior is covered with a glass grid of 3 by 5 foot units, which ties the office and hotel portions together visually. At 505 feet, the tower stands three feet lower than the UN Secretariat, which fits the district's zoning restrictions.
About this model
One United Nations Plaza is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
