3D print the Yuzhno-Sakhalinsk Airport Old Terminal
A free, printable model of the Yuzhno-Sakhalinsk Airport Old Terminal, a long terminal building with a glazed entrance and a flared control cab, among surrounding airport buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Flared control cab
A flared octagonal control cab projects above the terminal roof on a short pedestal, with an open balcony rail around it. Print friendly adapts the thin rails; Full detail keeps the glazing facets.
- Entrance canopy and glazing
A thin flat canopy cantilevers over a tall glazed entrance on slender supports. Use 0.12–0.16 mm layers to keep the canopy edge and the dense mullions crisp on a larger print.
- One piece with the ground
The Yuzhno-Sakhalinsk Airport Old Terminal is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Yuzhno-Sakhalinsk Airport Old Terminal takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Yuzhno-Sakhalinsk Airport Old Terminal
The old terminal building at Yuzhno-Sakhalinsk Airport was put into operation in 1965. It stands on Ivana Kuropatko Street in Yuzhno-Sakhalinsk, Russia. A later renovation fitted out another entrance to the terminal building, built to comply with all transport and aviation security requirements.
The building is the old terminal at Yuzhno-Sakhalinsk Airport, Russia. It housed passenger check-in counters and a baggage department. In August 2023, domestic flights were transferred entirely to the new Yuzhno-Sakhalinsk terminal. At that time, a notice said international flights would use the international section of the old airport terminal.
About this model
The Yuzhno-Sakhalinsk Airport Old Terminal is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
