A white 3D print of Palazzo Barbaran da Porto, a block with hipped roofs and tall columns facing a courtyard, packed among the surrounding buildings.

3D print Palazzo Barbaran da Porto

A free, printable model of Palazzo Barbaran da Porto, with its hipped roofs and two-level columns facing a courtyard, packed among the surrounding buildings of Vicenza, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Palazzo Barbaran da Porto model, North view North
  • Palazzo Barbaran da Porto model, East view East
  • Palazzo Barbaran da Porto model, South view South
  • Palazzo Barbaran da Porto model, West view West

© OpenStreetMap contributors

The model you print

Palazzo Barbaran da Porto in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slim two-level columns

    The columns facing the courtyard are thin and stand in two levels. Print larger or choose Full detail to keep them, and use a layer height of 0.12-0.16 mm for crisp vertical lines.

  2. Shallow facade relief

    The street front carries shallow window frames and an arched portal. At small sizes Print friendly softens such details; bigger prints keep them readable.

  3. One piece with the ground

    Palazzo Barbaran da Porto is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Palazzo Barbaran da Porto takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Palazzo Barbaran da Porto

Palazzo Barbaran da Porto stands in Vicenza, Italy. The Italian Renaissance architect Andrea Palladio designed it in 1569 and built it from 1570 to 1575 for Montano Barbarano, a noble of Vicenza. It is the one great city palace that Palladio managed to carry out completely. Since 1994 it has belonged to a UNESCO World Heritage Site covering the city of Vicenza plus Palladian villas elsewhere in the Veneto.

The design was a complex process. Three or more proposals in Palladio's own hand survive in London, each with a plan quite unlike the one built. Barbarano asked Palladio to respect several family houses already standing on the site, and he later acquired another adjoining house, which left the entrance portal off-center. Palladio blended the diverse existing structures into a unified building. On the ground floor, a four-columned atrium joins the two earlier building lots, and the interior is laid out in three aisles with four Ionic columns at the center.

For the decoration, Montano hired several leading artists of his day, among them Giovanni Battista Zelotti, Anselmo Canera and Andrea Vicentino, with stuccoes by Lorenzo Rubini. Inside are the Palladio Museum and CISA, an international center for the study of architecture named for Palladio. After a twenty-year restoration it opened to the public in 1998, and exhibition activities began in March 1999.

About this model

Palazzo Barbaran da Porto is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits