3D print Stadio Romeo Menti
A free, printable model of Stadio Romeo Menti in Vicenza, with its long covered grandstand, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stadio Romeo Menti in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low stand, thin canopy
The grandstand is a low, wide mass under a very thin roof. A larger print or Print friendly detail keeps the raked seating rows and the roof edge readable at this scale.
- Canopy overhang
The roof is a long sloping canopy that overhangs the seats. Print a little slower with good cooling so the edge stays clean, and use 0.12–0.16 mm layers for the seating steps.
- One piece with the ground
Stadio Romeo Menti is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stadio Romeo Menti takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stadio Romeo Menti
Stadio Romeo Menti is the football ground in Vicenza, Italy, named for Romeo Menti. It is home to L.R. Vicenza and holds 12,000 spectators. The city of Vicenza owns the ground, which opened in 1935. Vicenza Calcio used the stadium until 2018, when L.R. Vicenza took over. On November 11, 1989, it hosted an Italy national team friendly, a 1–0 win over Algeria that served as a warm-up for the World Cup Italy 90.
Later work removed the old grandstand's metal pillars, which had hindered the filming of football matches, and added seats at a corner of the south stand. Entrance turnstiles went in during 2007, and surveillance was strengthened. Give a hand to Menti, a 2013 repainting initiative, involved both the players and mayor Achille Variati.
About this model
Stadio Romeo Menti is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
