3D print the Parkway Theatre
A free, printable model of the Parkway Theatre and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arched front and rooftop tank
The long front has rows of small arches and a large arched window, and a small tank sits on the roof. Print friendly adapts these small parts; a layer height of 0.12–0.16 mm keeps the arches crisp.
- One piece with the ground
The Parkway Theatre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Parkway Theatre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Parkway Theatre
Built in 1928, the Parkway Theatre was also called the Rolland Theatre and is a historic former theater. Its address is 1768 St. Johns Place, where that street meets Eastern Parkway, in Brooklyn's Brownsville neighborhood, New York City. Harrison G. Wiseman is listed as its architect.
Its structure is steel frame and concrete, with a facade of buff-colored brick and terra cotta trim. A long, low three-story block runs along St. Johns Place. A triangular lobby block fronts a tall rectangular auditorium block and a stage fly loft block. The National Register of Historic Places listed it in 2010.
About this model
The Parkway Theatre is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
