Parliament House, Stockholm in 3D
Parliament House, Stockholm appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Parliament House, Stockholm may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Curved wing with fine detail
The semicircular wing is covered in rows of small arches and columns. Detail like this softens at small sizes, so a larger print or Full detail keeps it, and a 0.12 mm layer height helps.
- Low domes and roof edges
Two shallow domed roofs and a fine edge trim sit on the main block. Print friendly adapts the trim to your print size; slow printing keeps the dome tops smooth.
- One piece with the ground
Parliament House, Stockholm is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Parliament House, Stockholm takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Parliament House, Stockholm
Parliament House, called Riksdagshuset in Swedish, is the seat of the Swedish parliament, the Riksdag. It occupies nearly half of Helgeandsholmen, an island in the Gamla stan district of central Stockholm. Aron Johansson designed the complex in the Neoclassical style, with a Baroque Revival façade section at the center. A competition for the new Parliament building was held in 1889, and Johansson won it. Construction ran from 1897 to 1905.
On opening, the building took over from the former Riksdag home on the island of Riddarholmen, Gamla Riksdagshuset. The complex has two buildings. The Riksdag was housed in one, and Sveriges Riksbank, the Swedish National Bank, in the second, which has a semicircular shape. After the two-chamber Riksdag was replaced by a single-chamber legislature in 1971 and the bank moved out, the bank's building was rebuilt to hold the new Assembly Hall. The Right Livelihood Award has also been presented at a ceremony in Parliament House.
About this model
Parliament House, Stockholm is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





