3D print the Passaic Machine Works-Watts, Campbell & Company
A free, printable model of the Passaic Machine Works, a factory with several gabled roofs, and the streets and industrial buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roof trusses and gables
Several gabled roof sections, some with visible framing, sit side by side. Print friendly adapts thin framing to the print scale; Full detail on a larger print keeps more of the roof structure.
- One piece with the ground
The Passaic Machine Works-Watts, Campbell & Company is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Passaic Machine Works-Watts, Campbell & Company takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Passaic Machine Works-Watts, Campbell & Company
The Passaic Machine Works factory, known also under the name Watts, Campbell & Company, is a historic site in Newark, in Essex County, New Jersey. Its National Register of Historic Places listing dates from August 13, 1986. Watts Campbell built steam engines and rebuilt old machines.
In its earlier years the factory was about twice its present size and included a metal casting division. The section by the Passaic River, since demolished, held the casting work, while the section along McCarter Highway handled metal fabrication. At its peak the company employed over 330 machinists, and among its customers were Thomas Edison Labs and Campbell Soup Company.
Steam engine work ended as electrification and more efficient turbine generators made Corliss steam engines obsolete, and after the 1920s the factory built and repaired specialty machines. A 1950s restoration took away both the historic facade and the slate mansard roof, yet the interior kept machinery dating from as early as the 1850s, along with original wooden roof trusses. The factory closed in 2007.
About this model
The Passaic Machine Works-Watts, Campbell & Company is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
