A white 3D print of the Pennsylvania State Capitol, a wide building with a tall ribbed central dome, set among lawns, paths, roads and buildings.

3D print the Pennsylvania State Capitol

A free, printable model of the Pennsylvania State Capitol and the lawns, paths, roads and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Pennsylvania State Capitol model, North view North
  • Pennsylvania State Capitol model, East view East
  • Pennsylvania State Capitol model, South view South
  • Pennsylvania State Capitol model, West view West

© OpenStreetMap contributors

The model you print

Pennsylvania State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
23 mm
Scale
1:3,750

23 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Great dome and its lantern

    The ribbed central dome ends in a slim lantern and spire, the most delicate part of the model. Print friendly adapts the tip to the print scale; Full detail keeps it on a larger print, ideally printed slowly.

  2. Columned porticoes and small domes

    Slender columns line the porticoes, and smaller domes sit over the wings. A 0.12-0.16 mm layer height and a bigger print size keep these rows of fine detail crisp.

  3. One piece with the ground

    The Pennsylvania State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pennsylvania State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Pennsylvania State Capitol

The Pennsylvania State Capitol is the home of Pennsylvania's state government, in downtown Harrisburg. Joseph Miller Huston drew up the design in 1902, and the building was finished in 1906 in the Beaux-Arts style, with Renaissance decorative motifs throughout. It holds the chambers of the Pennsylvania General Assembly, comprising the House of Representatives together with the Senate, the Harrisburg chambers of the Supreme and Superior Courts, and the Governor's and Lieutenant Governor's offices.

The Huston Capitol, as this one is called, is the third state capitol to go up in Harrisburg. Fire destroyed the first, the Hills Capitol, in 1897; the Cobb Capitol, the second, was left unfinished when funding ended in 1899. Ground was broken on November 2, 1902, and the new capitol was dedicated by Governor Samuel W. Pennypacker on October 4, 1906, with President Theodore Roosevelt attending.

Sculptures, murals and stained glass fill it, most of them Pennsylvania-themed or Pennsylvanian-made, and the building is often called a "palace of art." It anchors the Pennsylvania State Capitol Complex. National Register of Historic Places listing came in 1977, and National Historic Landmark designation in 2006.

About this model

The Pennsylvania State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits