Perm-36 in 3D
Perm-36 appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Perm-36 may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long, low roofline
The model is a long, low building, so most of its height is the roof. A larger print keeps the rows of narrow window recesses readable; Full detail suits a fine nozzle.
- Small roof details
The small hip-roofed block at one end and the tiny box on the ridge are fine details. Print friendly adapts them for small prints; a layer height of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
Perm-36 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Perm-36 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Perm-36
Perm-36 went by the name ITK-6 as well, and was a Soviet forced labor colony. It lay near the village of Kuchino, about 100 km (60 miles) northeast of Perm, in Russia. It belonged to the Gulag, the large prison camp system the Soviet Union built during the Stalin era, and it initially worked as a logging camp that supplied timber. The camp dates from 1946 and shut in December 1987. From 1972 it was classed as strict regime and special regime, and was reserved for people the authorities called "especially dangerous state criminals", a group mostly made up of Soviet dissidents.
In 1994 the human rights organization Memorial preserved the site, and in 1995 it opened to visitors as a museum devoted to the history of political repression, popularly called the Gulag Museum. It was the sole surviving Gulag labor camp, since the Soviet government had abandoned or demolished the rest before the Soviet Union dissolved.
There were hopes that the site might gain UNESCO World Heritage status. In 2004, though, the World Monuments Fund listed Perm 36 on its Watchlist of the 100 Most Endangered Sites. Bodies of the Perm Krai administration later withdrew support and funding, which led to the museum closing in April 2014.
About this model
Perm-36 is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





