3D print the Phoenix Carnegie Library
A free, printable model of the Phoenix Carnegie Library and the park and paths around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Round drum and rooftop lantern
The curved rear wall and the small domed lantern on the roof are the finest features. Layers of 0.12–0.16 mm keep the curve smooth; a larger print or Full detail keeps the lantern and porch details.
- One piece with the ground
The Phoenix Carnegie Library is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Phoenix Carnegie Library takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Phoenix Carnegie Library
Library Park in Phoenix, Arizona, holds the Phoenix Carnegie Library, a historic site also called the Carnegie Center. The red brick library opened on February 14, 1908. The park lies along West Washington Street, between 10th Avenue and 12th Avenue, on land a Mr. Neahr donated to the city, and the National Register of Historic Places listed the site in 1974.
The city’s first public library began in spring 1898, in two rooms in the Fleming Block. The Phoenix Public Library was established in March 1901 with 1350 volumes. After years of effort, Andrew Carnegie agreed to a grant of $25,000, and the city accepted in July 1904. William R. Norton drew the plans, which William H. Reeves revised, and the project later passed to Millard & Creighton.
The building served as the library until a newer main library was built in 1952, and later housed a recreation hall, a social service center, storage and a homeless shelter. After restoration in 1984, it reopened in 1987 as a museum, the Arizona Hall of Fame Museum. Arizona Women’s Hall of Fame has its home in the building.
About this model
The Phoenix Carnegie Library is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
