3D print Public Bath No. 7
A free, printable model of Public Bath No. 7 and the tall buildings and streets around it in Park Slope, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arched windows and cornice
The front has tall arched windows, steps and a carved cornice, all fine detail at print scale. Layers of 0.12–0.16 mm keep it crisp; a larger print or Full detail keeps more.
- One piece with the ground
Public Bath No. 7 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Public Bath No. 7 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Public Bath No. 7
Public Bath No. 7, a historic bathhouse, stands in Park Slope, Brooklyn. The Brooklyn architect Raymond F. Almirall designed it, and it went up between 1906 and 1910. Its walls combine terracotta blocks the color of limestone with white glazed brick, in a design modeled on a Renaissance palazzo. The building is three bays by five bays.
In 1937 it was converted into a gymnasium. The National Register of Historic Places listed it in 1985, and its facade has been a New York City Landmark since 1984. In the 1990s it became a private events space called The Lyceum.
About this model
Public Bath No. 7 is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
