3D print Public School 15, Bronx
A free, printable model of Public School 15 and the street and houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower and weather vane
The small central bell tower ends in a steep roof and a thin weather vane. Print friendly adapts the thinnest tip at small scale; print slowly and cool well for the best result.
- Steep gabled wings
Two wings with steep roofs flank the tower. A layer height of 0.12–0.16 mm keeps the gable and brick detail crisp, and a bigger print keeps more of it.
- One piece with the ground
Public School 15, Bronx is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Public School 15, Bronx takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Public School 15, Bronx
In Eastchester in the Bronx stands Public School 15, a historic school building from 1877 in the Victorian Gothic style. The building is H-shaped, made of red brick on a stone foundation. A picturesque bell tower rises at the center.
Its steep pyramidal roof is finished with a weather vane. School use ended in the late 1970s, and the building has been used as a child care center since. The National Register of Historic Places listed it on December 10, 1981.
About this model
Public School 15, Bronx is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
