3D print the Renaissance Tower (Dallas)
A free, printable model of the Renaissance Tower and its surroundings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Renaissance Tower (Dallas) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 270 m
- On a 160 mm print
- 73 mm
- Scale
- 1:3,750
270 m of the Renaissance Tower (Dallas), 73 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, slow printing
A skyscraper is tall for its footprint. Print it slowly with good cooling, and a layer height of 0.12–0.16 mm keeps the vertical detail crisp.
- One piece with the ground
The Renaissance Tower (Dallas) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Renaissance Tower (Dallas) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Renaissance Tower (Dallas)
Renaissance Tower is a modernist skyscraper with 56 stories, standing at 1201 Elm Street in the heart of downtown Dallas, Texas. Its structural height is 270 m (886 ft). The firm Hellmuth, Obata and Kassabaum designed it, and it was completed in 1974 as the First International Bancshares Tower. When finished it measured 220 m (710 ft) and was the tallest building in Dallas.
Bank of America Plaza overtook it in 1985, and Comerica Bank Tower and Chase Tower were then under construction. A major renovation followed in 1986 to win back some prestige, with Skidmore, Owings and Merrill as architects. The exterior was re-glazed and the lighting on its sides removed. James T. Chiles designed a broadcast center and towers for the roof, one of them 54 m (176 ft), which raised the structural height to 270 m (886 ft) and made it the second-tallest building in Dallas. A glass pyramid at the base covers an underground food court two stories deep.
On November 7, 1981, Dan Goodwin climbed the outside of the tower in a Spider-Man suit, relying on suction cups plus his own hands and feet. In the 1980s television series Dallas, the lobby and exteriors played the fictional Ewing Oil's home. A room on the 54th floor served as the OCP boardroom in the movie RoboCop.
About this model
The Renaissance Tower (Dallas) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
