3D print the Red Town Hall
A free, printable 3D model of the Red Town Hall in Berlin, with its full city block and surrounding streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 74 m
- On a 160 mm print
- 26 mm
- Scale
- 1:3,750
74 m of the Red Town Hall, 26 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower and window rows
The town hall is a broad block with a tall tower. Its roofline and window rows carry the silhouette at print scale; print larger if you want the brick and window detail to read clearly.
- One piece with the ground
The Red Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Red Town Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Red Town Hall
The Red Town Hall, or Rotes Rathaus, is Berlin's town hall. It stands near Alexanderplatz in Berlin's Mitte district, on Rathausstraße, and houses the Governing Mayor and the Senate of Berlin. Hermann Friedrich Waesemann built it between 1861 and 1869 in a Northern Italian High Renaissance style. The design took the Old Town Hall in Toruń, Poland, as its model, while its tower recalls the cathedral tower at Laon in France. It replaced several medieval buildings and fills an entire city block.
Allied bombing in World War II badly damaged the brick building. It was rebuilt between 1951 and 1956 to the original plans. During the division of the city it served East Berlin as its town hall, while the Rathaus Schöneberg served West Berlin. After reunification, Berlin's administration moved back into the building on October 1, 1991. The town hall is listed as a cultural heritage monument in Berlin.
About this model
The Red Town Hall is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
