3D print the Royal Palace, Tonga
A free, printable model of the Royal Palace in Nukuʻalofa, a palace with deep verandas and small domed turrets, and the open grounds and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Royal Palace, Tonga
In the northwest of Nukuʻalofa, Tonga's capital, close to the Pacific Ocean, stands the kingdom's Royal Palace, known in Tongan as the pālasi. Built of wood in 1867, it is where the King of Tonga officially lives. Visitors cannot go inside, though the building is easy to see from the waterfront.
Reflecting the Tongan deference to the Royal Family, poets seldom name the palace outright and use indirect, allegoric names instead. One is Fanga-tapu ("sacred beach"), which refers to the stretch of shoreline in front of the building, and another is Loto-ʻā ("inside the fence"). No one dared to sit on the old stone fence, a meter high, which was held so sacred by the king, much less climb over it. King Tāufaʻāhau Tupou IV had a grid fence 3 meters high built after 1990.
The royal family has other palaces too: in Fuaʻamotu, at Liukava ("revolution") in Kolovai, at Kauvai near Longoteme, and at Tufumāhina and Vila (villa), which lie between Koloua and Pea. Crown Prince Tupoutoʻa built Vila in the 1990s and lived there after he became King George Tupou V, far from any neighbors.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 8 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 12 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Veranda posts and railings
- Slim posts and railings line the verandas on both floors. Print friendly adapts them to the print scale, while Full detail keeps every one for a larger print or a fine nozzle.
- Turrets with thin finials
- Small domed turrets end in thin finials, and one carries a flagpole. Print slowly with good cooling and use 0.12–0.16 mm layers to keep the tips crisp.
- One piece with the ground
- The Royal Palace, Tonga is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Royal Palace, Tonga takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Royal Palace, Tonga is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Royal Palace, Tonga STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Royal Palace, Tonga grows with the print: about 8 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
