3D print the Samuel Tredwell Skidmore House
A free, printable 3D model of the Samuel Tredwell Skidmore House within the dense blocks of taller and shorter buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small house in a dense city
This small house sits within a dense city model, so its details are tiny. A larger print and Full detail keep more of the small details, while Print friendly suits small prints.
- One piece with the ground
The Samuel Tredwell Skidmore House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Samuel Tredwell Skidmore House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Samuel Tredwell Skidmore House
The Samuel Tredwell Skidmore House stands on the north side of East Fourth Street, between Lafayette Street and the Bowery, in the NoHo neighborhood of Manhattan. Merchant Samuel Tredwell Skidmore was the client for this Greek Revival house of three and a half stories. New York City has designated it a landmark, and the National Register of Historic Places lists it too.
T. Thomas & Son developed the house, building from 1844 to 1845, on land that had been part of John Jacob Astor's estate. Skidmore's death came in 1881, and two years later his widow sold the property. In the 20th century the interiors were divided into apartments, then the house fell into disrepair, and a renovation followed in 2010.
The brick house rises three full stories over a raised basement, which has a rusticated facade, and the front is divided into three bays. A stoop leads to the main entrance, a doorway flanked by Ionic columns. The lot is deep and narrow: 25.75 feet (7.85 m) wide at the street and 82 feet (25 m) deep. Inside, the floor area totals 9,620 square feet (894 m2), divided into 10 apartments.
About this model
The Samuel Tredwell Skidmore House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
