3D print San Francesco di Paola, Naples
A free, printable 3D model of San Francesco di Paola in Naples and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
San Francesco di Paola, Naples in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 53 m
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
53 m of San Francesco di Paola, Naples, 19 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Portico columns and a dome
Portico columns are small, thin parts on a church model. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature on a larger print.
- One piece with the ground
San Francesco di Paola, Naples is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Francesco di Paola, Naples takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Francesco di Paola, Naples
The church of San Francesco di Paola stands on the west side of Naples's main square, Piazza del Plebiscito. Its construction ran from 1816 to 1846. Early in the 19th century, Joachim Murat, king of Naples and brother-in-law of Napoleon, planned the whole square and the large colonnaded building in honor of the emperor. After the Bourbons returned to the Neapolitan throne, Ferdinand I continued the work but turned the building into a church. He gave it a dedication to Saint Francis of Paola, a saint who had lodged in a monastery here in the 16th century.
The church recalls the Pantheon in Rome. Six columns and two Ionic pillars support the portico on its façade. The dome, 53 meters (174 ft) high, crowns a circular interior that has two side chapels. Leopoldo Laperuta, an architect from Naples, designed the portico, and Pietro Bianchi, a Swiss architect, designed the main building. Pietro Tenerani made the statue of St John Evangelist inside, and Vincenzo Camuccini painted St Francis of Paola resuscitating a dead man, in the apse.
About this model
San Francesco di Paola, Naples is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
