3D print the San Giovanni a Porta Latina
A free, printable model of San Giovanni a Porta Latina, a basilica church in Rome, among surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine edges and openings
Small openings and thin roof edges print cleanly at 0.12–0.16 mm layers. A larger print preserves them; Print friendly adapts the smallest parts at the default size.
- Print speed for thin parts
The upper parts are the most delicate. Print slowly with good cooling, and choose Full detail for a large print or a fine nozzle.
- One piece with the ground
The San Giovanni a Porta Latina is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The San Giovanni a Porta Latina takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the San Giovanni a Porta Latina
San Giovanni a Porta Latina is a basilica church in Rome. It stands near the Aurelian Wall's Porta Latina, a gate on the Via Latina, and its name means Saint John Before the Latin Gate. Tradition says that John the Evangelist was plunged into a vat of boiling oil in Rome during Domitian's reign, survived, and was then sent into exile on Patmos.
Construction is traditionally dated to the time of Pope Gelasius I, between 492 and 496. The oldest roof tiles support that dating: they bear a tax stamp from the rule of Theodoric the Great. Pope Adrian I restored the church in the 8th century, and its bell tower and portico were added later. Pope Celestine III reconsecrated it as the 12th century ended, and Baroque work of the 16th and 17th centuries was stripped out in 1940–1941, leaving a plainer interior.
At the entrance, a portico carried on four reused classical columns opens through five arches. The interior is divided into three naves by two rows of columns with semicircular arches, and the central nave closes in a half-hexagonal apse whose three windows are filled with honey-colored onyx. The central nave is decorated with roughly 50 scenes from the Old and New Testaments; their restoration was completed with the basilica in 1940–1941.
About this model
The San Giovanni a Porta Latina is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
