3D print the San Vitale, Rome
A free, printable model of San Vitale among the surrounding streets and buildings of central Rome, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the basilica larger
This basilica prints low at the default size. A larger print keeps the roofline and facade detail distinct; 0.12 to 0.16 mm layers preserve the wall detail.
- One piece with the ground
The San Vitale, Rome is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The San Vitale, Rome takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the San Vitale, Rome
San Vitale is an early Christian basilica on via Nazionale in the historic center of Rome. No Catholic place of worship anywhere in Rome's historic center predates it. The church was built in 400 with money from a wealthy widow named Vestina, and Pope Innocent I consecrated it in 401/402.
Its first dedication was to Saints Gervasius and Protasius, and it was known as the titulus Vestinae; the dedication to Saint Vitalis and his family is dated to 412. The building has a single nave, and its walls are covered with frescoes of martyrdom scenes. No other basilica in Rome has more frescoes. The apse survives from the original fifth-century church and holds Andrea Commodi's fresco The Ascent to Calvary.
Pope Sixtus IV had the basilica extensively rebuilt before the Jubilee of 1475, and further work followed in 1512, 1598, 1859, 1938 and 1960. Because the city around it changed over the centuries, the floor sits several meters below the level of via Nazionale.
About this model
The San Vitale, Rome is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
