3D print Sant'Andrea della Valle
A free, printable 3D model of Sant'Andrea della Valle and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sant'Andrea della Valle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
22 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A large dome
A dome shows layer lines across its curve. A layer height of 0.12–0.16 mm keeps the curve smooth, and a larger print size keeps more small detail.
- One piece with the ground
Sant'Andrea della Valle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sant'Andrea della Valle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Sant'Andrea della Valle
Sant'Andrea della Valle in Rome, Italy, is a titular church and a minor basilica, located in the rione of Sant'Eustachio. The Theatines have their general curia here. The church sits on Piazza Vidoni, where Corso Vittorio Emanuele crosses Corso Rinascimento. It is among the great preaching churches of the 17th century that Counter-Reformation orders built in the Centro Storico.
Planning began in 1582, when the duchess of Amalfi, Donna Costanza Piccolomini d'Aragona, left her palace and the neighboring church of San Sebastiano to the Theatines for a new church. Work began around 1590 to designs by Pier Paolo Olivieri and Giacomo della Porta. It resumed by 1608 under a grander plan drawn mainly by Carlo Maderno, paid for by a huge endowment of more than 150,000 gold scudi. By 1650 the interior was complete, and between 1655 and 1663 Carlo Rainaldi added the Baroque facade.
Frescoing the dome ranked among the largest commissions of its era. Giovanni Lanfranco finished his lavish dome decoration in 1627, and it served as a model for dome decoration over the following decades. For a long time this was Rome's third largest dome, behind only St Peter's Basilica and the Pantheon. The church also holds the cenotaphs of Pope Pius II and Pope Pius III, and the first act of Puccini's Tosca takes place there.
About this model
Sant'Andrea della Valle is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
