3D print Santa Maria dei Miracoli
A free, printable 3D model of Santa Maria dei Miracoli in Rome, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Santa Maria dei Miracoli in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Cupola and bell tower
A cupola and a bell tower are the small features on a church like this. Print friendly adapts thin parts to the print scale; a larger print or a layer height of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
Santa Maria dei Miracoli is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santa Maria dei Miracoli takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Santa Maria dei Miracoli
Two churches that look alike, Santa Maria in Montesanto and Santa Maria dei Miracoli, stand on Rome's Piazza del Popolo, where Via del Corso enters the square, opposite the northern gate in the Aurelian Walls. The two are often called twins because of their similar outward appearance, though they differ in plan and exterior details. Together they frame the trident of streets leaving the square: Via di Ripetta, Via del Corso and Via del Babuino.
Both churches go back to a 17th-century restoration of what had been the main entrance to Rome in the Middle Ages and the Renaissance, from the Via Flaminia. Pope Alexander VII commissioned the architect Carlo Rainaldi to design the monumental entrance of Via del Corso. Rainaldi's scheme called for two centrally planned churches, but the sites differed in shape, which forced major changes. Cardinal Girolamo Gastaldi financed both, and his crest appears in each.
Work on Santa Maria dei Miracoli ran from 1675 to 1681. It has a circular plan and an octagonal cupola. Its bell tower, from the 18th century, is the work of Girolamo Theodoli. Antonio Raggi, a pupil of Bernini, made the rich stucco decoration inside. The high altar holds the image of the Virgin, regarded as miraculous, from which the church takes its name.
About this model
Santa Maria dei Miracoli is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
