3D print the Schermerhorn Row Block
A free, printable model of one building of the Schermerhorn Row Block, with its chimney and roof dormers, shown among the neighboring buildings and generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Chimney and dormers on the roof
The modeled building carries a tall chimney and small gabled dormers along its roofline. Print friendly adapts these to the print scale; Full detail keeps them, best with a larger print and 0.12–0.16 mm layers.
- One piece with the ground
The Schermerhorn Row Block is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Schermerhorn Row Block takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Schermerhorn Row Block
The Schermerhorn Row Block sits near the South Street Seaport, in Manhattan's Financial District. John, South, Fulton and Front streets form its edges. The block is named for Peter Schermerhorn. It holds approximately 20 buildings, put up in the late 18th century and the early 19th century in Federal and Greek Revival styles. At first the Schermerhorn Row name covered just 2 through 18 Fulton Street, buildings dating from 1811–1812.
The site is reclaimed land along the East River, lying between two boat slips that were demolished long ago. Burling Slip was south of the block and Beekman Slip lay north of it. Construction on the block began in the 1790s at the earliest. By the mid-19th century it housed many maritime businesses, among them grocers, steamship lines, and boarding houses. In the 1960s and 1970s, with demolition and redevelopment plans in the air, the South Street Seaport Museum assumed control. Work to renovate the buildings ran from 1981 to 1983, with another round in the early 2000s.
Most buildings on the block rise between four and six stories. Those at 2 through 18 Fulton Street look nearly identical from outside, with cast-iron storefronts at street level and brick facades above. Many of the others, especially along Front and John streets, show granite on the ground floor with brick above. Landmark designation came in 1968 for the buildings, and in 1971 the block, collectively, won a place on the National Register of Historic Places.
About this model
The Schermerhorn Row Block is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
