3D print Seven Hudson Square
A free, printable model of this building with two stepped towers joined by a lower middle section, and the Manhattan streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 28 mm
- Scale
- 1:3,750
28 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin towers with a link
The two towers are joined by a lower middle section, leaving a deep gap between them above it. Printing slowly with good cooling helps the upper tower floors stay clean.
- Dense column grid
The facades carry a fine grid of columns. Print friendly adapts it to your print scale; Full detail keeps every column, which suits a larger print or a fine nozzle.
- One piece with the ground
Seven Hudson Square is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Seven Hudson Square takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Seven Hudson Square
SOM designed 7 Hudson Square, an office building in Manhattan that was completed in 2024. Its official address is 137 Varick Street. The 7 Hudson Square name nods to WABC-TV, whose station broadcasts on channel 7, and the building carries a second name, the Robert A. Iger Building.
Disney and some of its subsidiaries keep their East Coast headquarters in the building, with studios for ABC News, ESPN and WABC-TV. In 2018 Disney said it would relocate its offices in New York away from West 66th Street and into Hudson Square; it signed a lease of 99 years on the site, owned by Trinity Church, for $650 million.
Silverstein Properties developed the building. Its terra cotta exterior is laid out as a grid of rounded columns in a lichen green shade, with one tower to the east and another to the west. The design echoes the 2001 Scholastic Building in Soho by Aldo Rossi, another building with thick columns. The two towers are bridged by a double-height great room with a wall-sized screen and louvered skylights, and four taping facilities sit underground for studio audiences.
About this model
Seven Hudson Square is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
