A white 3D print of the South Dakota State Capitol, a symmetrical building with a central dome and a columned entrance, surrounded by lawns, paths and roads.

3D print the South Dakota State Capitol

A free, printable model of the South Dakota State Capitol and its domed center, with the lawns, roads and paths around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • South Dakota State Capitol model, North view North
  • South Dakota State Capitol model, East view East
  • South Dakota State Capitol model, South view South
  • South Dakota State Capitol model, West view West

© OpenStreetMap contributors

The model you print

South Dakota State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
13 mm
Scale
1:3,750

13 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome and drum details

    The ribbed dome sits on a ring of columns with a small lantern on top. Print friendly adapts these fine parts; for Full detail, print larger with a 0.12–0.16 mm layer height.

  2. Entrance columns and steps

    The columned entrance and stepped approach are small at print scale. A bigger print size keeps them readable.

  3. One piece with the ground

    The South Dakota State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The South Dakota State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the South Dakota State Capitol

South Dakota's state capitol is in the capital, Pierre, at 500 East Capitol Avenue, and it houses the state legislature. Most state officials have offices in it, among them the Governor. It was constructed between 1905 and 1910 from designs by the Minneapolis firm of Bell & Detweiler, who gave it features similar to those of the Montana State Capitol in Helena. Planning and construction cost almost $1 million.

Plans for a large addition on the north side began in 1921, and the Capitol Annex was completed in 1932 by Perkins & McWayne of Sioux Falls. Inside, a terrazzo tile floor is the subject of local lore: it is said to have been laid by 66 Italian artists, each given a blue stone to set in the floor, though only 55 have been found. A marble staircase on the second floor leads into a rotunda whose dome is 96 feet high, and sixteen Tree of Life images decorate the inside of the dome.

The House of Representatives and the Senate are on the third floor, with public galleries on the fourth. Four memorials stand on the grounds: the Fighting Stallions Memorial, the Flaming Fountain Memorial, the Law Enforcement Officer Memorial and the World War II Memorial, whose six bronze figures stand on a peninsula in Capitol Lake. Bronze statues of the state's former governors line the Trail of Governors.

About this model

The South Dakota State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits