3D print St. Andrew's Presbyterian Church
A free, printable 3D model of St. Andrew's Presbyterian Church in Ottawa, shown with the surrounding streets and buildings and generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Andrew's Presbyterian Church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail on a stone church
Churches often carry small windows and roof trim. Choose Full detail for a larger print, or a layer height of 0.12–0.16 mm in the slicer, to keep the roofline crisp.
- One piece with the ground
St. Andrew's Presbyterian Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Andrew's Presbyterian Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Andrew's Presbyterian Church
Presbyterians in Ottawa, Ontario, Canada, have no older church than St. Andrew's, which stands on Wellington Street at Kent Street. Its story starts in 1828: land given by Nicholas Sparks in 1827 allowed the first church to be built and opened. Scottish and Irish laborers working on the Rideau Canal founded it and put it up themselves. A new building took its place in 1872, and William Tutin Thomas, an architect from Montreal, was awarded the commission between 1872 and 1874.
Since Ottawa then had no Anglican church, St. Andrew's argued that it represented the Established Church of Scotland and so should count as the city's established church. The authorities accepted this, and in 1837 the church received a large glebe south of the city. Later, the land between Bronson Avenue and the Rideau Canal turned into the neighborhood called the Glebe.
The church is a Gothic Revival building made of stone. William Lyon Mackenzie King, as Prime Minister, attended services here during his time in Ottawa, and in February 1940 the sanctuary hosted the funeral of Lord Tweedsmuir, also known as the author John Buchan. In 1988 an office building named St. Andrew's Tower went up at the back and is joined to the church.
About this model
St. Andrew's Presbyterian Church is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
