3D print St. Barbara's Church, Brooklyn
A free, printable model of St. Barbara’s Church with its twin towers and dome, and the buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin towers and a dome
Two slender bell towers with small domes and crosses frame the front, with a larger dome behind. Print friendly adapts the thinnest tops to the scale; print slowly with good cooling, and use 0.12–0.16 mm layers.
- One piece with the ground
St. Barbara's Church, Brooklyn is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Barbara's Church, Brooklyn takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Barbara's Church, Brooklyn
St. Barbara’s is a Roman Catholic parish church in northern Brooklyn’s Bushwick-Ridgewood neighborhood, within the Roman Catholic Diocese of Brooklyn. The parish began as a national parish for the German Catholic community. By the 1960s the congregation had become Italian and then Hispanic.
The church was built in 1910 to designs by the firm Helmle and Huberty. The guidebook AIA Guide to New York City says it is named both for the saint and for the little daughter of the brewer Leonard Eppig, who gave money to the parish. St. Leonard’s, nearby, followed a similar pattern in its naming.
About this model
St. Barbara's Church, Brooklyn is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
