3D print St. James' A. M. E. Church, Newark
A free, printable model of St. James’ A.M.E. Church, with its tall front tower and long nave, among nearby streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower pinnacles and tall windows
The front tower has small corner pinnacles, and the nave has rows of tall narrow windows. Print slowly with good cooling, and use Full detail at a larger size to keep them.
- One piece with the ground
St. James' A. M. E. Church, Newark is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. James' A. M. E. Church, Newark takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. James' A. M. E. Church, Newark
St. James' A.M.E. Church lies in Newark, New Jersey, at High and Court Streets. Architect John Welch built it in 1850, and it was dedicated in 1854. Welch is said to have taken it on as one of his first projects after coming to the United States. The building was first the High Street Presbyterian Church.
Its design aims at a florid Gothic look, echoing the pointed Gothic of the 14th century. It is of hand-cut stone from Little Falls, laid in a pattern roughly like Flemish bond. The tower at the center of the front is Norman in style, with a few early English touches. Toward the rear, the nave and a later addition run down a steep hill, so the building looks quite large, though its interior is not very large. The rear lecture hall was added in 1890 and is a separate building of brick faced with brownstone.
The congregation moved into the High Street building in January 1945. In 1972 the church was entered on the historic registers of both New Jersey and the nation, and in 2000 the New Jersey Historic Trust awarded it a grant of $1.3 million.
About this model
St. James' A. M. E. Church, Newark is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
