3D print St. John's Protestant Episcopal Church, Yonkers
A free, printable model of St. John's Church in Yonkers, a cross-shaped church with steep roofs, with the taller buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Crosses and chimneys on the gables
Small crosses and chimney tops rise above the steep roofs. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print.
- Steep roofs and rose window
The tall roofs carry fine lines, and the front facade has a rose window. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
St. John's Protestant Episcopal Church, Yonkers is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. John's Protestant Episcopal Church, Yonkers takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. John's Protestant Episcopal Church, Yonkers
St. John's Church is a historic Episcopal church (formally St. John's Protestant Episcopal Church) found at 1 Hudson Street, within Yonkers' Getty Square neighborhood, in Westchester County, New York. The complex has a main church, a chapel, a rectory and a school. Frederick Philipse III, who was the third lord of Philipsburg Manor, built the original church in 1752 from rough gray fieldstone quarried locally, with red-brick quoins.
A fire in 1791 destroyed the roof, interior woodwork and steeple. A year after the fire the building was renovated and consecrated under the name St John's Church, Philipsburgh, the first time that name was used. An extension went up in 1849 while Yonkers was growing into an industrial city, and in 1874 the architect Edward Tuckerman Potter significantly rebuilt and enlarged the church. He kept one wall of the old church, and its round-arched windows and doorway served as the pattern for those of the new building.
The church is laid out as a cross, under a gable roof covered in slate. Four battered buttresses, one half-round rose window and two quarter-round rose windows mark the front. The chapel and a two and one-half-story rectory date from 1890 to 1891, and the architect R. H. Robertson linked them to the church. In the Revolutionary War it was used as a field hospital by both sides, and the National Register of Historic Places listed the complex in 1982.
About this model
St. John's Protestant Episcopal Church, Yonkers is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
