3D print St. Rose of Lima Church
A free, printable model of St. Rose of Lima Church, a long gabled church with an arched front and a rectory beside it, among taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arched front and rose window
The gabled front has arched openings, a round window and small crosses on top. Print Friendly keeps them sturdy; a larger print with Full detail and 0.12 mm layers keeps more of the carving.
- One piece with the ground
St. Rose of Lima Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Rose of Lima Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Rose of Lima Church
St. Rose of Lima Church is a Roman Catholic parish church of the Archdiocese of New York, on West 165th Street (number 510), between Audubon and Amsterdam Avenues, in Washington Heights, Manhattan. Joseph H. McGuire designed it in the Romanesque Revival style, and it was built in 1902–05. Archbishop Michael A. Corrigan established the parish in July 1901.
Corrigan commissioned the church, a double-height building of brick and stone, for $70,000. Cardinal Farley dedicated it on December 10, 1905. McGuire also designed the rectory next door, a four-story brick-and-stone building with a basement, put up in 1903–1904 for $16,000.
The parish later added a school and a convent. A four-story brick parish school at 1086 St. Nicholas Avenue went up in 1924-25 to designs by the architect Robert J. Reiley, at a cost of $250,000. At the same time Reiley designed a four-story brick convent at 511 West 164th Street, which cost $75,000.
About this model
St. Rose of Lima Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
