3D print St. Theresa Church, Trumbull
A free, printable model of St. Theresa Church in Trumbull, a long steep-roofed church with a thin spire, shown with the surrounding roads and open ground, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Theresa Church, Trumbull in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Very slender spire
The spire is a long, thin taper with a tiny cross at its tip, the most delicate part of the model. Print friendly adapts it to the print scale; Full detail keeps it as modeled, best printed slowly with good cooling.
- Narrow windows and buttresses
The side walls carry grouped narrow windows and small buttresses. A larger print size and a 0.12 mm layer height keep these details crisp.
- One piece with the ground
St. Theresa Church, Trumbull is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Theresa Church, Trumbull takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Theresa Church, Trumbull
In Trumbull, Connecticut, St. Theresa Church serves a Roman Catholic parish of the Diocese of Bridgeport, regarded as the Mother Church of the town. Bishop Maurice F. McAuliffe of Hartford founded the parish on October 4, 1934. It was Trumbull's first Catholic church, and he named it for Thérèse of Lisieux, known as the Little Flower of Jesus.
The original church was a small white frame building in a classic New England colonial design, with room for about four hundred people. Bishop McAuliffe dedicated it on September 22, 1935. The nearby McLevy homestead was turned into the parish rectory.
In 1960 permission came from Bishop Lawrence J. Shehan to construct a cathedral-like church of granite and limestone. Bishop Walter W. Curtis dedicated it on April 1, 1962. J. Gerald Phelan is listed as its architect. Our Lady of Fátima Chapel was dedicated by the parish on October 1, 2017, for perpetual Eucharistic adoration.
About this model
St. Theresa Church, Trumbull is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
