3D print the State Historical Museum
A free, printable 3D model of the State Historical Museum in Moscow and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
State Historical Museum in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
18 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roof and facade detail
A large museum building carries many small roof and facade details. Print friendly adapts thin parts to the print scale, while Full detail with a larger print size keeps more of them.
- One piece with the ground
The State Historical Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The State Historical Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the State Historical Museum
The State Historical Museum is a museum of Russian history in Moscow, between Red Square and Manege Square. Its displays begin with relics of prehistoric tribes and run to artworks that members of the Romanov dynasty acquired, and the collection numbers in the millions of objects. The site was earlier occupied by the Principal Medicine Store, which Peter the Great ordered built in the Moscow Baroque style.
Ivan Zabelin, Aleksey Uvarov and other Slavophiles founded the museum in 1872. After a prolonged competition, the project went to Vladimir Osipovich Sherwood. The present building follows his neo-Russian design and went up during the years 1875 to 1881. Its first 11 exhibit halls opened officially in 1883, when the tsar and his wife visited.
Tsar Alexander III became the museum's honorary president in 1894, and the museum was renamed in 1895 to include his name. Viktor Vasnetsov, Ivan Aivazovsky and Henryk Siemiradzki were among the artists who decorated the interiors in the Russian Revival style. In the Soviet period the murals were judged gaudy and were plastered over. Its collection spans ancient times through the early 20th century.
About this model
The State Historical Museum is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
