3D print Stratford station
A free, printable 3D model of Stratford station in London, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stratford station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine edges on a wide station
A station has many small details. A larger print size or a 0.12–0.16 mm layer height keeps fine edges crisp, and Print friendly adapts thin parts to the print scale.
- One piece with the ground
Stratford station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stratford station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stratford station
Stratford is a big, multi-level interchange in the London Borough of Newham, in east London. It serves the town of Stratford and Stratford City, a mixed-use development, with London Underground and London Overground trains, the Docklands Light Railway and the Elizabeth line. National Rail trains run on two lines through it, the Great Eastern Main Line and the West Anglia Main Line. Liverpool Street is 6.5 km (4 miles 3 chains) away by main line.
The Eastern Counties Railway opened the station on June 20, 1839. Engineer John Braithwaite recommended the 5 ft (1,524 mm) gauge first used for its tracks, and conversion to standard gauge was carried out between September and October 1844. Stratford became a Great Eastern Railway station in 1862, and a significant rebuilding took place in 1877.
The Central line serves Stratford, and the Jubilee line ends here in the east. It is the busiest Underground station outside London fare zone 1. Stratford International lies roughly 400 yards (370 m) north of the station. The station was a key hub for travel during the 2012 Olympic and Paralympic Games in London.
About this model
Stratford station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
