3D print Swissôtel The Stamford
A free, printable model of Swissôtel The Stamford and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Swissôtel The Stamford in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 226 m
- On a 160 mm print
- 66 mm
- Scale
- 1:3,750
226 m of Swissôtel The Stamford, 66 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
A tall tower rewards a taller print. A layer height of 0.12–0.16 mm keeps vertical detail crisp, and printing the upper part slowly with good cooling helps thin parts come out clean.
- One piece with the ground
Swissôtel The Stamford is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Swissôtel The Stamford takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Swissôtel The Stamford
Swissôtel The Stamford is a hotel at 2 Stamford Road in Singapore. It was designed by the architect I.M. Pei and first carried the name The Westin Stamford. Standing 226 meters (741 ft) high, no hotel anywhere was taller when it opened in 1986, and it is listed among the tallest hotels in Southeast Asia.
The South Korean firm SsangYong Group completed the building in 1986. The Westin Stamford kept its status as the world's tallest hotel building until 1997, when Baiyoke Tower II was finished in Bangkok, Thailand. Pei also designed a smaller sister hotel next door, The Westin Plaza. On January 1, 2002, the two hotels were renamed, and the larger one became Swissôtel The Stamford.
The hotel belongs to the Raffles City complex, which brings together two hotels, a convention center, a shopping center and an office tower. It stands over two MRT stations, City Hall and Esplanade. It has 1,252 rooms and suites and 12 restaurants and bars, and the Raffles City Convention Centre offers 27 meeting rooms and three ballrooms.
About this model
Swissôtel The Stamford is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
