3D print Taj Mahal Bangladesh
A free, printable model of Taj Mahal Bangladesh, a domed building with four slender minarets on a broad platform, with the green grounds around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Taj Mahal Bangladesh in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Four slender minarets
Four tall, thin minarets stand at the corners of the platform. Print friendly adapts them to the print scale; Full detail keeps them on a larger print. Print slowly with cooling.
- Dome, small domes and finials
The main dome is ringed by small domed pavilions with tiny finials. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
Taj Mahal Bangladesh is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Taj Mahal Bangladesh takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Taj Mahal Bangladesh
Taj Mahal Bangladesh is an architectural imitation of the Taj Mahal, the Mughal mausoleum in Agra, India. Ahsanullah Moni, a Bangladeshi film-maker, built the structure as a tourist destination for low-income families from Bangladesh.
The five-year build, from 2003 to 2008, covered a complex of 1.6 hectares and cost about $58 million, and the public could enter from March 2009. The Indian High Commission voiced concern that the original building might be subject to copyright infringement, even though the copy was described as unlikely to detract from the original's magnificence.
About this model
Taj Mahal Bangladesh is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
