3D print Telus Sky
A free, printable 3D model of Telus Sky and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Telus Sky in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 222 m
- On a 160 mm print
- 60 mm
- Scale
- 1:3,750
222 m of Telus Sky, 60 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender tower, small details
A tall tower is slender for its footprint. Print friendly adapts small details to the print scale; Full detail keeps them as modeled on larger prints, and slow printing with 0.12–0.16 mm layers helps.
- One piece with the ground
Telus Sky is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Telus Sky takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Telus Sky
Telus Sky, later renamed Calgary House, stands 222.3 m (729 ft) tall, with 60 stories, in downtown Calgary, Alberta, Canada, and combines several uses in one skyscraper. When it was completed in 2019 it became Calgary's third-tallest building; Brookfield Place East and The Bow were taller. Bjarke Ingels Group and Dialog designed it, following an announcement on July 4, 2013.
The building has a clean rectangular base with efficient open-office floors. As it rises, the floor plates slowly shrink and pixelate, creating small balconies and terraces. Cladding on its north and south facades is an LED display called Northern Lights, designed by the Canadian artist Douglas Coupland, ranking among the largest pieces of public art in Canada.
Construction started in February 2015 on a small site at 7 Avenue and Centre Street SW, where a three-storey building from 1928 had stood. With no room for traditional excavators or ramps, a hydraulic crane with a clam-shell bucket excavated 80,000 m3 of dirt, reaching as deep as 31 m (102 ft).
About this model
Telus Sky is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
