3D print The Masterpiece (Hong Kong)
A free, printable 3D model of The Masterpiece and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
The Masterpiece (Hong Kong) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 261 m
- On a 160 mm print
- 71 mm
- Scale
- 1:3,750
261 m of The Masterpiece (Hong Kong), 71 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, fine vertical detail
A slender high-rise shows its detail in the vertical lines. Print friendly adapts small details to the print scale; printing slowly with 0.12–0.16 mm layers keeps them crisp.
- One piece with the ground
The Masterpiece (Hong Kong) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Masterpiece (Hong Kong) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Masterpiece (Hong Kong)
The Masterpiece, a luxury apartment tower in Tsim Sha Tsui on the Kowloon Peninsula in Hong Kong, has 64 floors and stands 261 meters (856 ft) high. The Urban Renewal Authority joined New World Development as co-developer. Underground links join the complex to two MTR stations, East Tsim Sha Tsui and Tsim Sha Tsui.
The lower levels and basement hold the six-story K11 shopping mall, the K11 Art Mall, which measures 31,600 square meters (340,000 sq ft). It finished in December 2009 and is marketed as an "art mall" because it incorporates various art displays. A 381-room Hyatt Regency hotel occupies levels 3 to 24 and opened on October 2, 2009. Luxury residential apartments sit above, with penthouse units on the top floors.
The hotel's predecessor stood two blocks west, on Nathan Road. It began in 1964 as The President Hotel, and on November 1, 1969 it took the name Hong Kong Hyatt Hotel. It was the first Hyatt hotel set up outside the United States.
About this model
The Masterpiece (Hong Kong) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
