3D print The Ogden
A free, printable model of The Ogden, a boxy tower with a banded base and a notched top, and the downtown blocks and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About The Ogden
The Ogden began life as Streamline Tower, a luxury condominium tower of 21 stories in downtown Las Vegas, Nevada, at 150 North Las Vegas Boulevard. It was announced in 2004 for the former Golden Inn motel property, which covered 0.40 ha (1 acre). The motel stood where North Las Vegas Boulevard meets Ogden Avenue, on the southeast corner, opposite the Neonopolis mall. Demolition began on November 30, 2004. At a publicity event on the property, Mayor Oscar Goodman marked the start of the motel's demolition by swinging a sledgehammer.
A half-dozen investors developed the project, among them Dusty Allen, who had played baseball for the Las Vegas Stars, and Corus Bank financed it. PGAL was chosen as architect by May 2005, and Martin-Harris Construction served as general contractor. Construction began in 2006. In May 2007 the tower was topped off. Its opening came on May 1, 2008, and the building had 275 units then. A parking garage of six stories, with 428 spaces, was also built.
The building took the name The Ogden in January 2011, for Ogden Avenue, a street it faces. Its units had been leased to renters in 2010, at rents from $1,000 a month. In 2013 DK Las Vegas purchased the building; a year later it started renovating units and selling them as their leases ended.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 22 mm | 1:3,750 |
| 200 mm | 28 mm | 1:3,000 |
| 256 mm | 36 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fine rows of facade detail
- Fine rows of window details run up the tall walls. Layers of 0.12–0.16 mm keep them crisp, and a larger print size keeps the rows distinct.
- Notched top with small roof details
- The top steps down between two taller wings and carries small roof details. Print friendly adapts them to the print scale, while Full detail keeps every modeled feature on a larger print.
- One piece with the ground
- The Ogden is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ogden takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Ogden is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a The Ogden STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Ogden grows with the print: about 22 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
