3D print The Signature at MGM Grand
A free, printable model of The Signature at MGM Grand, three slender towers with arched crowns, and the roads, driveways and large buildings around them, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About The Signature at MGM Grand
A condo-hotel attached to the MGM Grand resort, The Signature at MGM Grand sits in Paradise, Nevada, close to the Las Vegas Strip. Three towers make up the complex, each rising 38 stories, and they hold 1,728 units in total. Every tower is linked to the MGM Grand, and a moving walkway ran from each one to the resort. Each tower holds 576 units, and gold glass covers the exteriors. The Signature had its own entrance, along with a separate staff of bellhops, concierges and valets.
MGM Mirage partnered with Turnberry Associates on the project, announcing the deal on December 5, 2002. The land had held the MGM Grand Adventures Theme Park, a 1993 attraction that shut down earlier in 2002. Sales of units, under the name The Residences at MGM Grand, started in early 2004, and the first tower was underway at Harmon Avenue and Koval Lane later that year. On October 7, 2005, that tower was topped off, and it opened in May 2006. It opened ahead of any other condo-hotel near the Las Vegas Strip, and Bergman Walls & Associates designed the project.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 39 mm | 1:3,750 |
| 200 mm | 49 mm | 1:3,000 |
| 256 mm | 63 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Three tall, slender towers
- Each tower is narrow compared with its height. Print slowly with good cooling so they stay straight, and a larger print size gives sturdier shafts.
- Arched crowns and vertical ribs
- Every tower ends in a thin curved arch, and the faces carry fine vertical ribs. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print or a fine nozzle.
- One piece with the ground
- The Signature at MGM Grand is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Signature at MGM Grand takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Signature at MGM Grand is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a The Signature at MGM Grand STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Signature at MGM Grand grows with the print: about 39 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
