3D print Tour France
A free, printable 3D model of Tour France and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tour France in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 126 m
- On a 160 mm print
- 34 mm
- Scale
- 1:3,750
126 m of Tour France, 34 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slow cooling for a tall tower
A tall, slim tower leaves little area for the top layers to cool. Print slowly, use a layer height of 0.12–0.16 mm, and choose "Print friendly" if thin details fail.
- One piece with the ground
Tour France is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tour France takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tour France
Tour France is a residential skyscraper in the La Défense business district, in Puteaux, west of Paris. It was built in 1973 and ranks among the tallest residential towers in France, reaching 126 meters. Its architect was Jean de Mailly.
The tower stands beside the Seine and looks out over the historical center of Paris. It has 41 floors above ground, and it is classed both as a skyscraper and as a residential tower. The business district around it is La Défense, in Puteaux, France.
About this model
Tour France is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
