3D print Tours Duo
A free, printable model of Tours Duo and the surrounding streets and buildings in Paris, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tours Duo in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 180 m
- On a 160 mm print
- 50 mm
- Scale
- 1:3,750
180 m of Tours Duo, 50 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two tall towers
Tall towers print best at a layer height of 0.12–0.16 mm, and printing slowly with good cooling helps any tall, thin parts come out clean.
- One piece with the ground
Tours Duo is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tours Duo takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tours Duo
Jean Nouvel designed the two skyscrapers known as Tours Duo, in Paris's 13th arrondissement beside the Boulevard Périphérique, next to Ivry-sur-Seine. The Tour Duo n°1 reaches 180 m. Construction started in late March 2017, and both finished towers were handed over in 2021.
This mixed-use project spans over 108,000 m2 and is mostly offices, with a hotel, a restaurant, an auditorium, shops, green terraces and a bar whose panoramic terrace looks out over Paris. The project is meant to close the "belt" of towers and high-rise buildings around the gates of Paris.
About this model
Tours Duo is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
