3D print Triumph Palace
A free, printable 3D model of Triumph Palace and the surrounding streets and buildings of Moscow, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Triumph Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 264 m
- On a 160 mm print
- 90 mm
- Scale
- 1:3,750
264 m of Triumph Palace, 90 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slow down for the tower
A tall building gives each layer little time to cool near the top. Printing slowly with good cooling, and a layer height of 0.12–0.16 mm, keeps the upper floors crisp.
- One piece with the ground
Triumph Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Triumph Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Triumph Palace
Triumph Palace is an apartment building in Moscow, described as the tallest apartment building in the city and in all of Europe. Work on the site started in 2001 and finished in 2006. The tower has 57 stories and holds 987 apartments, and it is about 264.1 m (866 ft) tall.
Some call it the Eighth Sister, because it looks like the Seven Sisters, the group of Stalin-era skyscrapers raised in Moscow during the 1950s. The tower was topped out on December 20, 2003, which made it the tallest skyscraper in both Europe and Russia at 264.1 m (866 ft), until Moscow's 268-meter Naberezhnaya Tower block C was inaugurated in 2007. Vertical City, a Channel 4 series from 2009, covered the building in detail.
About this model
Triumph Palace is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
