3D print Tun Mustapha Tower
A free, printable model of Tun Mustapha Tower, a round tower rising from a wide low base beside the water, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tun Mustapha Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 122 m
- On a 160 mm print
- 34 mm
- Scale
- 1:3,750
122 m of Tun Mustapha Tower, 34 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide, flat podium wings
Broad low wings spread out around the base of the tower. A layer height of 0.12–0.16 mm keeps the edges of these flat roofs crisp.
- Round shaft with ring bands
The round shaft has fine horizontal bands and a flared foot. Print friendly adapts fine bands to the print scale; Full detail keeps them on a larger print.
- One piece with the ground
Tun Mustapha Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tun Mustapha Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tun Mustapha Tower
Tun Mustapha Tower (Menara Tun Mustapha in Malay) stands in Kota Kinabalu, Sabah, Malaysia: a glass tower of 30 stories that rises 122 m (400 ft). In 1976 the Japanese firm Mori Building Company, which develops and manages property, built it.
The tower was first named Yayasan Sabah Tower because the Sabah Foundation (Yayasan Sabah), a foundation sponsored by the state to promote education and economic development, had its home there. A renaming in 2001 honored Datu Mustapha Datu Harun, who was earlier a chief minister of Sabah and its state governor.
The 18th floor revolves, turning slowly to give a complete view of Likas Bay; a full 360 degree turn takes one hour. Urban climber Alain Robert climbed the tower on April 20, 1997, with the government's approval, as part of a fundraiser. He set off from the 16th floor and made the summit in five minutes.
About this model
Tun Mustapha Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
