A white 3D print of Axiata Arena, a wide arena with a curved, finely ribbed roof above a lattice-patterned band and thin columns, set among low buildings, roads and open ground.

3D print Axiata Arena

A free, printable model of Axiata Arena and the low buildings, roads and open ground around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Axiata Arena model, North view North
  • Axiata Arena model, East view East
  • Axiata Arena model, South view South
  • Axiata Arena model, West view West
On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Fine ribs on the curved roof

    The wide, curved roof is marked with many fine ribs. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print. Layers of 0.12 to 0.16 mm keep them crisp.

  2. Thin columns and lattice band

    Slender columns line the lower edge, under a band of small diamond-shaped details. A bigger print size keeps more of them.

  3. One piece with the ground

    Axiata Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Axiata Arena takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Axiata Arena

Axiata Arena, a multi-purpose indoor arena, is in Kuala Lumpur, Malaysia, and is also called Putra Indoor Stadium (Stadium Putra in Malay). It sits within Bukit Jalil's National Sports Complex, whose other facilities include the Bukit Jalil National Stadium and the National Aquatic Centre. Putra Stadium was rebranded as Axiata Arena on January 16, 2017, through a partnership of Perbadanan Stadium Malaysia and Axiata Group Berhad. It was Malaysia's first stadium with a corporate name, and it was later renamed Unifi Arena through a naming-rights deal with Telekom Malaysia Berhad.

No other indoor venue in Malaysia has more seats: the maximum capacity is 16,000. Three main doors lead to a rectangular arena floor measuring 69 × 25 meters, which can be adapted for sports including boxing, badminton, basketball, table tennis, judo and gymnastics. The complex has several other sports facilities.

The arena was the main venue for gymnastics at the 1998 Commonwealth Games in Kuala Lumpur, and it has hosted entertainment events such as Disney on Ice. The 2009 ASEAN Para Games were opened there by Tun Abdullah Ahmad Badawi on August 15, 2009. The Independence Day Parade was held in the arena on August 31, 2010, the first time that parade took place indoors. Another event listed for the arena is the 2007 BWF World Championships.

About this model

Axiata Arena is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in Kuala Lumpur

All 5 Kuala Lumpur landmark models