3D print the Tun Perak Tower
A free, printable model of the tower, with its interlocking ribbed blocks and slanted base and top, and the dense city blocks and roads around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tun Perak Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 244 m
- On a 160 mm print
- 67 mm
- Scale
- 1:3,750
244 m of the Tun Perak Tower, 67 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ribbed sides and slanted ends
Fine vertical ribs cover the sides, and the base and top slant in opposite directions. Print friendly adapts the ribs to the print scale; Full detail keeps them on a larger print.
- Layer height for the crossing bands
Bands of small crossing members mark two levels of the tower. A layer height of 0.12–0.16 mm and a bigger print size keep them readable.
- One piece with the ground
The Tun Perak Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tun Perak Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tun Perak Tower
In Pudu, Kuala Lumpur, Malaysia, stands the Tun Perak Tower, a skyscraper once called the Maybank Tower. Its name in Malay is Menara Tun Perak. Maybank had its headquarters there before moving to Merdeka 118, a nearby building, and the tower houses the Maybank Numismatic Museum.
Work began in 1984 on Court Hill, where a colonial era Sessions Court building had stood, and the tower was finished in 1988. Before the Petronas Twin Towers rose in 1995, it held the title of tallest building in Kuala Lumpur and in Malaysia, at 244 m (801 ft). It still stands out in the city's skyline.
The floor plan combines two blocks with square bases, joined where they overlap at one corner. Each block has a roof and a lower base that slant in the direction opposite to the other block, while the midsection stands at a perpendicular angle. The main entrances are at the two corners where the blocks combine, covered by tiered triangular roofs. The design takes inspiration from an upward-pointing sheathed kris, and it blends traditional elements into modern Malaysian architecture.
About this model
The Tun Perak Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
