3D print Union Station (Toronto)
A free, printable model of Union Station and the city blocks around it on Front Street West in Toronto, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:5,313
8 mm tall on a 160 mm print
Make this print opens the generator on a 850 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A long block, a low roof
The station fills a long city block at low height, so a bigger print gives its long front more room to read.
- Layers for a long front
The front runs the whole length of the block, so its edges are what a printer sees. Layers of 0.12–0.16 mm hold them, and Print friendly adapts small parts on a small print.
- One piece with the ground
Union Station (Toronto) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Union Station (Toronto) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Union Station (Toronto)
Union Station is a big railway station and transport hub on Front Street West in downtown Toronto, in the block framed by Bay and York Streets. The city government owns the station building; Metrolinx, the province's transit agency, owns the train shed and the tracks. The Toronto Terminals Railway operates it, a company owned jointly by Canadian National and Canadian Pacific. It is the largest railway station in Canada, and the most opulent.
The Montreal firm Ross and Macdonald designed it in the Beaux-Arts style for the Grand Trunk and Canadian Pacific railways, helped by Hugh Jones, an architect with the CPR, and John M. Lyle, who practiced in Toronto. It went up in 1927. Three connected blocks run 229 m (752 ft) along Front Street behind 22 Roman Tuscan columns of Bedford limestone. The entrance opens into the Great Hall, 76 m (250 ft) long.
The station gained National Historic Site of Canada status in 1975 and Heritage Railway Station status in 1989. The historic sites board described the design as among the finest Beaux-Arts station designs in Canada. Via Rail and Amtrak run inter-city trains, GO Transit runs regional rail, and the TTC subway and streetcars connect at the station next door.
About this model
Union Station (Toronto) is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
