3D print the United Charities Building
A free, printable model of the United Charities Building and the dense Manhattan blocks around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Gabled roofline on the south face
The south side shows a row of small gables along the roofline. Full detail keeps them on a large print; Print friendly simplifies them at small sizes.
- A narrow building between towers
The building sits mid-block with taller neighbors on several sides, so facade ornament is cut off in shadow. A larger print size keeps the fine relief readable.
- One piece with the ground
The United Charities Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The United Charities Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the United Charities Building
The United Charities Building stands at 105 East 22nd Street, also addressed as 287 Park Avenue South, in Manhattan's Gramercy Park neighborhood, near the edge of the Flatiron District. The banker John Stewart Kennedy had it built in 1893 for the Charity Organization Society. The Society represented the pooled resources of many Protestant charities, and the building also housed several other charities Kennedy favored, giving them a low cost base for their work.
R. H. Robertson designed the building, with help from the firm Rowe & Baker. Kennedy picked him for his wide experience with charitable buildings. James Baker, Robertson's nephew, did the later additions: in 1897 the original mansard roof came off and three stories joined the original seven, and in 1915 a four-story addition was built at 111 East 22nd.
The complex gained National Historic Landmark status in 1991, in recognition of the Society's part in advancing progressive social welfare policies. The main building has housed charitable groups like the Community Service Society, while its northern part, renamed the Kennedy Building, became apartments. From 1946, an extension on 22nd Street served as the Dockworkers' Union headquarters.
About this model
The United Charities Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
