A white 3D print of the Vang Stave Church, a church with stepped, tiered roofs and a tall separate tower, on a green hillside with a pond, roads and a few houses.

3D print the Vang Stave Church

A free, printable model of the Vang Stave Church with its tiered roofs and separate tower, and the green hillside, roads and houses around it in Karpacz, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Vang Stave Church model, North view North
  • Vang Stave Church model, East view East
  • Vang Stave Church model, South view South
  • Vang Stave Church model, West view West

© OpenStreetMap contributors

The model you print

Vang Stave Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Stacked roofs and thin spires

    The stepped roofs, small spires and the tall separate tower are slender and closely spaced. Print slowly with cooling, use a 0.12–0.16 mm layer height, and try Full detail on a larger print.

  2. One piece with the ground

    The Vang Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Vang Stave Church takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Vang Stave Church

The Vang Stave Church stands in Karpacz in the Karkonosze mountains of Poland. It was moved there from Norway, where it stood in Vang Municipality in the Valdres region, and rebuilt in 1842. Poland has no other stave church. Its original construction, in the parish of Vang, dates to around 1200, and its structure has four posts and a single nave. It is used as a Protestant parish church.

In 1832 the local council in Vang decided to pull the church down because it was too small and structurally unsafe. The painter Johan Christian Dahl tried to save it, and in January 1841 he bought it at auction for 86 speciedaler plus 1 ort and 7 skilling. Crown Prince Frederick William, who became King Frederick William IV of Prussia, a man Dahl knew personally, then took responsibility for the church and the cost of re-erecting it.

The architect Franz Wilhelm Schiertz surveyed the church and marked its materials. The pieces went by ship from Lærdalsøyri, bound for Stettin (Szczecin), and spent a winter stored in Berlin. The planned site on Pfaueninsel near Potsdam was dropped, and Count Christian Leopold von Schaffgotsch donated a site in Karpacz Górny instead. The foundation stone was laid on August 2, 1842, and the new site lies 885 meters (2,904 ft) above sea level.

About this model

The Vang Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits