3D print the Vladimir Palace
A free, printable 3D model of the Vladimir Palace on the Palace Embankment in Saint Petersburg, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long palace footprint
The palace prints with a long footprint at the default scale, so a larger print size helps the outline and corners read clearly.
- Fine layers for edges
Use 0.12–0.16 mm layers to keep the vertical edges of the frontage crisp.
- One piece with the ground
The Vladimir Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Vladimir Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Vladimir Palace
The Vladimir Palace was the home of Grand Duke Vladimir Alexandrovich, son of Alexander II, and ranks among the last imperial palaces built in Saint Petersburg. A team of architects that included Vasily Kenel and Aleksandr Rezanov, among others, designed it. Construction on the waterfront ran from 1867 to 1872, with more building and extensions in the 1880s and 1890s.
The palace stands on the south bank of the Neva, on the Palace Embankment, a position extremely prized by the Russian aristocracy. Its Neo-Renaissance facade carries stucco rustication and follows the palazzi of Leon Battista Alberti in Florence. The main porch is Bremen sandstone, decorated with coats-of-arms, griffins, and cast-iron lanterns, while Portland cement is used for the remaining detail.
Inside are some 360 rooms decorated in a mix of historic styles, from Neo-Renaissance and Gothic Revival to Russian Revival, Rococo, Byzantine, and Louis XIV. Maximilian Messmacher added to the interior ornament in 1881–1891, and art historians such as Nikolay Punin regard it as a leading monument to the 19th-century enthusiasm for historicism. After the 1917 revolution the property was confiscated and later transferred to the House of Scientists, where it has been preserved under the Russian Academy of Sciences.
About this model
The Vladimir Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
