3D print the Constantine Palace
A free, printable model of the Constantine Palace and the grounds around it at Strelna near St. Petersburg, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Facade detail at print scale
A palace model carries many small facade details. Print friendly detail adapts them to the print scale; a larger print helps those details stay crisp.
- One piece with the ground
The Constantine Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Constantine Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Constantine Palace
The Constantine Palace, also called the Great Strelna Palace, is a Russian imperial palace at Strelna near St. Petersburg. Construction began under Peter the Great, and the palace and its gardens were first completed in the early 18th century, with expansions continuing into the early 19th. Peter wanted an imperial palace that would surpass Versailles in France; the palace itself was laid out on June 22, 1720 to a design by Nicola Michetti, after earlier plans by Sebastiano Cipriani and Jean-Baptiste Le Blond.
The estate passed to Paul I and then to Konstantin Pavlovich, the palace's namesake, and remained in imperial hands until the Bolshevik Revolution in 1917. In the 1750s Francesco Bartolomeo Rastrelli was entrusted with completing the palace, which gained a grand staircase in its eastern wing. Later architects added a belvedere, a ceremonial enfilade and a house church. During the Second World War the palace and park were almost completely destroyed, leaving only the stone frame, and the building was fully restored by 1950.
In 2000 more than 140 hectares around the palace came under the Russian Federation's Directorate of the President, and restoration work began. The rebuilt complex opened on May 30–31, 2003 and took the name Palace of Congresses. It hosted the 32nd G8 summit in July 2006 and the 2013 G20 summit in Saint Petersburg.
About this model
The Constantine Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
